PORTLAND, Ore--21 Aug--PRNewswire-AsiaNet/InfoQuest
Axial Vector(TM) Engine Corporation (OTC Bulletin Board: AXVC) announced today that the initial running of the "Workhorse 7.1" engine on a dynamometer (dyno) test cell at a leading independent testing laboratory in Detroit Michigan has been launched and is designed to yield valuable information to optimize the design.
The engine carries about 90 data probes enabling the gathering of a wide array of engine performance and operational parameters as the engine is put through its paces at various speeds and loads. (A photo of the engine in the test cell will be posted on our website Friday, 18 August.) Parameters that are monitored include gas emission analysis in addition to torque, horsepower,
Dynamometer information is not only invaluable in confirming engine performance under a variety of conditions, but also serves as a development tool for improving the engine performance and operation including durability.
As a new diesel engine that never had been fired, the Workhorse 7.1 successfully underwent pre-combustion tests that included the dynamometer gradually increasing the spinning speed of the engine up to 400 RPM without fuel or combustion. This gradual ramping up of speed allows for a controlled and monitored wearing-in of the engine. The engine performed normally as
The next phase of testing moves to firing-up the engine. This will be an exciting and important phase when a wide range of data on engine performance will be collected including torque and horsepower using a variety of fuels. We shall inform our present and potential shareholders when the engine fires-up and a few weeks later, when the data has been collected and interpreted, we
Dr. Raymond Brouzes, President and CEO of Axial Vector(TM) Engine Corporation statd: "Naturally we are pleased with the results of the first level of trials on the engine. We are now confident that there are no fatal flaws in the mechanical design of our engine. The next important phase that we eagerly await is the firing up of the engine and confirmation of our design specifications."
About Axial Vector(TM) Engine Corporation
Axial Vector(TM) Engine Corporation is a publicly traded company that owns, develops and licenses proprietary intellectual property regarding unique internal combustion engine and generator technologies. We are applying these technologies to develop an exciting, new, smaller and lighter internal combustion engine that produces significantly greater horsepower torque with a
Key entry markets for the Axial Vector(TM) Engine include a number of specific military and industrial applications. Additionally, we are developing a family of Axial Flux electric power generators that shall operate in a fully integrated fashion with our unique Axial Vector(TM) Engine technology. The resulting GENSET will consume less fuel per unit of electrical power output (kWh) and are considerably smaller than any known internal combustion engine generators.
Forward-Looking Statements
This press release may be deemed to contain forward-looking information. Any forward-looking statements are made pursuant to the safe harbor provisions of the Private Securities Litigation Reform Act of 1995. Forward-looking statements, including statements as to industry trends, future economic performance, anticipated profitability, anticipated revenues and expenses, and
For Further Information Please Contact:
DR. RAYMOND BROUZES, PRESIDENT & CEO
One World Trade Center
121 SW Salmon Street, Ste 1100
Portland, OR 97204
503-471-1348
RAYMOND.BROUZES@AXIALVECTORENGINE.COM
www.axialvectorengine.com
REDWOOD CONSULTANTS, LLC
415-884-0348
INVESTORINFO@REDWOODCONSULTANTS.COM
You may also wish to our website at visit www.axialvectorengine.com for regular updates on the development of Axial Vector Technologies.
SOURCE: Axial Vector Engine Corporation
CONTACT: DR. RAYMOND BROUZES, PRESIDENT & CEO of
Axial Vector(TM) Engine Corporation
+1-503-471-1348
or RAYMOND.BROUZES@AXIALVECTORENGINE.COM
or REDWOOD CONSULTANTS, LLC
+1-415-884-0348
or INVESTORINFO@REDWOODCONSULTANTS.COM , for Axial Vector
Web site: http://www.axialvectorengine.com/
--Distributed by AsiaNet ( www.asianetnews.net )--
บริษัท แอกเซียลเวคเตอร์เอ็นจินคอร์ปอเรชั่น หรือ Axial Vector(tm) Engine Corporation (OTC Bulletin Board: AXVC.OB) ประกาศในวันนี้ว่าได้เริ่มต้นทำการเผาไหม้เครื่องยนต์ "เวิร์คฮอส 7.1" แล้ว เครื่องยนต์ AVEC Workhorse 7.1 ได้เริ่มต้นการเผาไหม้เมื่อวันพฤหัสบดีที่ 14 กันยายน และสามารถทำการส่งกำลังได้เป็นครั้งแรกที่บริษัทวิศวกรรมเครื่องยนต์ในดีทรอยต์ซึ่งเป็นบริษัทบุคคลที่สามที่มีชื่อเสียงและได้รับความเชื่อถืออย่างสูง การทดสอบด้านการพัฒนาเครื่องยนต์จะดำเนินการขั้นต่อไปในการแก้ไขปัญหาที่